Audio technology
Bluetooth HDT adopted: a 7.5 Mbps radio paves the way for lossless audio

The Bluetooth SIG has made High Data Throughput an optional part of Core 7.0. The transport is ready; the standardised premium audio application that would use it is expected only in 2027.
Bluetooth has a new, faster radio layer. On 4 November 2026 the Bluetooth Special Interest Group, the body that writes the standard, announced Bluetooth High Data Throughput (HDT), an optional feature of the recently adopted Bluetooth Core 7.0 specification. HDT raises the maximum bit rate of Bluetooth Low Energy (LE) to 7.5 Mbps, which the SIG puts at nearly four times the 2 Mbps of the current LE 2M mode. Its first flagship application, according to the SIG, will be standardised premium wireless audio, including lossless and high-resolution playback, multichannel surround and spatial audio.
What HDT actually is
HDT is a new physical layer, or PHY: the part of the standard that defines how bits are put onto the radio wave. It stays in the same 2.4 GHz band and channel spacing as Bluetooth LE, but replaces the simple modulation used today with denser schemes (π/4 QPSK, 8PSK and 16QAM) combined with forward error correction. The SIG's technical overview, dated 3 November, lists five rates: 2, 3 and 4 Mbps are mandatory for any HDT radio, while 6 and 7.5 Mbps are optional. The rate can change packet by packet, larger packets can carry several payloads, and only the corrupted blocks need to be resent.
Two practical details matter for listeners and buyers. First, HDT needs new radio hardware: existing devices cannot gain it through a software update. Second, 7.5 Mbps is a raw radio rate, not the audio bandwidth an app will see; audioXpress notes that usable throughput will be lower once protocol overhead is counted. Every connection still starts on the classic modulation and then switches to HDT, falling back if conditions require.
Why audio people should care, and what is missing
Today, high-quality Bluetooth audio relies on proprietary codecs such as LDAC or aptX, which work only between devices that license them. A SIG-standardised path to lossless playback over LE Audio could, in principle, make that kind of quality available across brands. The technical document confirms that the isochronous streams used by LE Audio, both one-to-one and broadcast, can run over the new PHY.
But the adoption covers the transport only. No standardised lossless codec or audio profile has been published yet. The SIG says the premium wireless audio application is expected in 2027, and audioXpress suggests a codec announcement could come around CES 2027. Until then, no headphone or speaker can claim standard Bluetooth lossless audio on the strength of HDT alone.
The chips are already moving
Silicon suppliers have been preparing for months. Realtek showed its RTL8773J HDT audio chip at COMPUTEX 2026 and demonstrated HDT testing with Rohde & Schwarz. IP supplier Ceva says more than ten customers have licensed its HDT technology, including partner Actions Technology for its ATS296X wireless audio chip family. Bluetooth SIG CEO Neville Meijers called HDT "a powerful foundation for the next generation of wireless innovation". According to audioXpress, the SIG's longer-term roadmap also extends Bluetooth LE into the 5 GHz and 6 GHz bands.



